2790147

2004-UP COLORADO/CANYON

INSTALLATION INSTRUCTIONS

Unplug rear license plate lamp.

Remove rear bumper, retain the bumper bolts for hitch installation.

Remove the rear right & left bed bolt’s, retain the bolts for hitch installation.(fig.1)

Place hitch under truck with Sir Michaels logo to the rear or the truck. Raise hitch into position & align hitch mounting holes to truck frame bumper bolt holes. Reinstall bumper bolts into the bumper mounting holes,(fig2) do not tighten any bolts until all bolts have been installed. Reinstall rear bed bolts thru the hitch mounting holes and into bed mounts.(fig3) Install roll pan brackets (fig 4) by sandwiching between frame &hitch. Tighten bed bolts first. Now tighten all remaining bolts at this time. Hitch will now be installed

Your truck is now ready to install your Sir Michaels Roll Pan & Sir Michaels license plate flip